FLASH DRIVES come in a wide variety of shapes, sizes and thickness.
It is VERY IMPORTANT to measure your USB drive from its thickest point – especially if it has an irregular shape. In general, we recommend you use a folder with a backbone to accommodate the thickness of the drive. However, if you have a thinner, stick style drive (NO THICKER THAN 1/4″) acceptable results can be achieved with a standard folder without a backbone. It is important to ask for samples to ensure proper fit.
Slits can be added to the RIGHT POCKET ONLY of limited items, for no additional charge. See specifications for more details.
Slits should be used with “stick style” (not novelty) drives.
They are not intended for use with drives thicker than 1/2″.
Slits function as a temporary carrier only, and offer no permanent protection. They can be added to the RIGHT POCKET of the items shown below, based on the size of the drive.
FLASH DRIVE SLITS cannot be used in the same pocket with any other pocket options (card slots, etc.)
Available items:
F-1 (1/8″ – 1/4″ max): 08-01, 08-28, 08-11 and 88-01 (1/2″, 3/4″ and 1″ rings only)
F-2 (5/16″ – 1/2″ max): 08-02, 08-03, 88-01 (1/2″, 3/4″ and 1″ rings only)
